Why Isn’t My Pan Being Detected on My Induction Cooktop?

A pan not being detected on induction almost always comes down to one of three things: the base isn’t actually magnetic, it’s too small or off-center for the zone, or there’s residue, warping, or moisture breaking contact with the glass. Work through these in order before assuming the cooktop itself is faulty.

Most cooktops show a flashing error code (often “E0” or similar) when no compatible pan is detected — that’s the cooktop telling you it genuinely can’t see a valid load, not a random glitch.

The short answer

  • Non-magnetic base (aluminum, copper, glass, low-iron stainless): the single most common cause. Run the magnet test.
  • Pan too small for the zone, or placed off-center: reposition or switch to a smaller zone.
  • Warped or uneven base: poor contact breaks detection even on a magnetic pan.
  • Residue, grease, or moisture between pan and glass: wipe both before cooking.
  • Worn cookware with a degraded bonded layer: older pans can lose compatibility over years of heavy use.
  • Unstable voltage or a shared circuit: less common, but worth ruling out if every pan fails intermittently.

1. The base isn’t magnetic

Aluminum, copper, glass, and some lower-grade stainless steel don’t create the magnetic reaction induction needs, no matter how well-made the pan is. Fix: run the fridge-magnet test on the base — if it doesn’t stick firmly, the pan won’t work on induction regardless of brand or price. This includes some nonstick pans that look identical to induction-ready ones but lack the bonded magnetic layer underneath the coating, a trap covered in my nonstick pan guide.

2. Wrong size or off-center

Detection sensors need a minimum base area in contact with the zone; a small pan on a large zone, or any pan placed off-center, can fail to register even if it’s fully magnetic. Fix: center the pan on the zone, and check that its base diameter meets the zone’s minimum — see my pan size guide for the typical ranges.

3. Warped or uneven base

A base that rocks or doesn’t sit flat loses even contact with the glass, which weakens or breaks the magnetic connection needed for detection. Fix: check flatness with a straightedge across the base; retire any pan that rocks noticeably, as covered in my uneven heating guide.

4. Residue, grease, or moisture

Spills, grease, or water trapped between the pan’s base and the cooktop surface can interfere with detection, and so can objects accidentally left underneath the pan (a stacked lid, a utensil). Fix: wipe both the pan’s base and the cooktop surface before placing the pan down, and make sure nothing else is between them.

5. Worn or aging cookware

Repeated heating cycles, scratches, dents, or harsh scrubbing can gradually weaken a pan’s bonded magnetic layer over years of heavy use, even if it worked fine when new. Fix: if an older pan has stopped being detected while newer pans of the same type work fine, it may genuinely be worn out rather than misused — avoiding harsh scrubbing (see my cleaning guide) and not stacking heavy pots on top of it helps it last longer.

6. Less common causes

  • Dirty or scratched cooktop glass: burnt residue or abrasive damage can disrupt sensing. Clean with a mild cleaner made for ceramic glass once the surface has cooled.
  • Unstable or low voltage: a loose plug, an extension cord, or a shared circuit with another heavy appliance can disrupt detection intermittently. Plug directly into a wall socket and avoid sharing the circuit.
  • Overheating or blocked vents: the cooktop may shut down temporarily to protect itself. Let it cool and clear any blocked vents.
  • Software glitch: if detection fails repeatedly across multiple known-good pans, switch off, unplug, wait a few minutes, and try again before calling for service.

FAQ

What does a flashing “E0” or similar code mean on my induction cooktop?

It almost always means the cooktop isn’t detecting a compatible pan. Remove the pan, check it against the causes above, reposition it centered on the zone, and try again.

My pan worked fine before and suddenly stopped being detected. What changed?

Check for new residue or moisture on the base first, since that’s the most common sudden-onset cause. If the base has become warped or visibly worn since it last worked, that’s the more likely explanation for a gradual decline.

Does every zone on my induction cooktop have the same minimum pan size?

Not necessarily — some cooktops build smaller zones specifically for small cookware like egg pans or milk pans. Check your zone’s specific minimum rather than assuming it’s the same across the whole cooktop.