I tested it

NuWave PIC Double

Product photo of the NuWave PIC Double, shown on its own without cookware.

The NuWave PIC Double is an 1,800-watt double induction cooktop with two independently controlled 8-inch coils, 94 temperature settings from 100-575°F in 5°F increments, and a 25-pound weight capacity per side. NuWave sets temperatures in 5-degree steps instead of power levels, which makes it easy to hold oil at frying temperature or keep chocolate melted.

Shop now (opens Amazon in a new tab)

My verdict

Near-top power sharing between two independently controlled zones, with precise 5-degree temperature steps that make holding frying oil or melted chocolate genuinely easy. The displayed temperature ran noticeably hotter than actual results on some settings, a real calibration quirk worth adjusting for.

My test results

Dual-high-heat test: second-best result in this comparison, trailing only the pricier Double Pro. Sear-and-hold test: seared chicken on one side while keeping rice warm on the other, with the chicken side holding its heat throughout. Temperature calibration: eggs needed the setting dialed down about 25°F from the target to get the intended result.

1 quart, one side on4 min 52 sec
1 quart, both sides on high8 min 10 sec
Low simmerSteady

Quick facts

1,800W total, selectable at 900W/1,500W/1,800W. Two independently controlled 8-inch coils, 11.5-inch ceramic glass cooking surfaces. 94 temperature settings, 100-575°F in 5°F increments, plus 6 presets. 25 lbs weight capacity per side.

My notes

The NuWave PIC Double is an 1,800-watt double induction cooktop with two independently controlled 8-inch coils, 94 temperature settings from 100-575°F in 5°F increments, and a 25-pound weight capacity per side.

NuWave sets temperatures in 5-degree steps instead of power levels, which makes it easy to hold oil at frying temperature or keep chocolate melted. Its power sharing gave the best “both on high” time in my tests apart from the Double Pro. When I seared chicken on one side and kept rice warm on the other, the chicken side kept its heat.

The 900-watt setting is handy on a weak circuit or in a recreational vehicle (RV). Some temperature settings felt hotter than the number on screen; I learned to set it 25 degrees lower for eggs.

Why the NuWave PIC Double wins its class

Near-top-tier power sharing between zones

Only the pricier Double Pro managed a better “both zones on high” result in this test — a sign the power-management between the two 8-inch coils is genuinely well-engineered, not just an afterthought.

Temperature-based control instead of relative power levels

94 distinct 5-degree steps give real precision for tasks like holding frying oil steady or keeping chocolate melted, which is harder to do reliably on a burner that only offers relative power numbers.

A low-power mode built for weak circuits

The 900W setting is specifically useful for an RV or a circuit that can’t handle the full 1,800W draw, which matters for a double burner more than a single since the combined load is higher.

Where this NuWave PIC Double review comes from

Specs come from NuWave’s own published figures for this model. Worth flagging honestly: in my own testing, some temperature settings ran noticeably hotter than the displayed number — for eggs specifically, I had to dial the setting down about 25 degrees from the target to get the actual result I wanted, which is a real calibration quirk worth knowing about before you rely on the displayed number precisely.

If the NuWave PIC Double isn’t quite right for you

If you want the best possible dual-high-heat performance: see the NuWave Double Pro, which edged this one out on simultaneous high-power use.

See the full field: how this one stacked up against other doubles in my guide to the best double-burner induction cooktops.

Shop now (opens Amazon in a new tab)